Serial Device Server for Ethernet

The Serial Device Server allows the connection of our level converters and dataloggers with RS232C interface to the 10/100 BaseT Ethernet in the easiest way. This allows you to access the M-Bus meters from several PCs on the network. When using our M-Bus dataloggers, it is also possible to read the consumption data via the Internet. An included Windows driver emulates a virtual, serial port on the PC and transfers the data over the network. This allows you to keep on using your serial PC software for communication.

Connects serial devices to the Ethernet
Converts 10/100 BaseT to RS232
Network protocols: TCP/IP, UDP/IP,...
RS232: independent of protocol / transparent
For M-Bus Level Converters and Centrals
Windows driver for virtual COM-Port
Go on using your RS232-software
Configuration with software or webbrowser

Technical Data

Ethernet connector	10BaseT (RJ45)
Serieller connector	RS232C, DB9 plug 1 channel: RX, TX, RTS, CTS, GND 3 channels: Rx1, TX1, RX2, TX2, RX3, TX3
Power supply	9 .. 18 VDC, 150mA at 12V
LED displays	2 LED ́s for operating status 1 LED ́s for Ethernetlink
Operating temperature	-5 .. 55 °C
Operating humidity	10-90%, ot condensing
Housing	B x L x H = 48 x 90 x 25 mm
Mounting	Wall or DIN rail
Weight	55 g

Downloads

Ordering information

Order Number	Description
TCP001	Serial Device Server with driver software Plug-In power supply, Patch cable and RS232C cable for M-Bus
TCP002	WiFi version of the Serial Device Server
TBA DSUB	Adapter DSub - screwterminals for 3 channel use